Werbung
12
1
ON
UNIT
TARE
EN
3
4
1. Weighing surface
2. Battery compartment cover
3. UNIT button (change unit)
water
• Measuring water volume
• Measuring milk volume
milk
• Tare symbol TARE
Owner's manual
2
5
4. Display
5. Turn on/tare button
Owner's manual
1. Place the device on a flat and stable surface.
2. Press the turn on/tare button. The display will show all elements for 3 seconds. The
display will show value 0. If another value appears, press the turn on/tare button.
3. Note: if the ambient temperature changes more than 5°C, wait 30 minutes.
4. Press the UNIT button to change the unit. Press and hold the UNIT button to switch
between metric and imperial units.
5. Place the object on the weighing surface. The weight will appear on the display.
6. If the object exceeds the weighing range, the display shows O-ld.
7. To turn off the scale, press and hold the turn on/tare button. The scale will turn off
automatically after two minutes of idle.
1. Turn on the scale and select the measuring water/milk mode. Wait until the display
stabilizes. Place the measuring container on the weighing surface.
2. Press the turn on/tare button. The display will show value 0.
3. Press the UNIT button to change the unit.
4. Pour the water or milk to the measuring container. The volume of the liquid in the
measuring container will be displayed.
5. Keep in mind that the measuring container includes in weighing capacity of the scale.
We recommend using as light a measuring container as possible
1. Turn on the scale and place an empty measuring container. Wait until the display
stabilizes.
2. Press the turn on/tare button. The TARE icon will appear on the display.
3. Place the object you wish to weigh in the measuring container. The weight of the
object in the measuring container will be displayed.
4. Keep in mind that the measuring container includes in weighing capacity of the scale.
We recommend using as light a measuring container as possible.
• If the display shows
, replace the batteries.
• Remove the battery compartment cover.
• Take out old batteries and insert new ones, according to polarity.
• Close the battery compartment cover.
13
EN
Werbung
