Ronix RP-1160 Bedienungsanleitung Seite 22

CORRECT USE OF STANDARD ACCESSORIES
- The washer is equipped with the adjustable nozzle.
- Jet adjustment from pencil to fan.
WARNING!
DO NOT ADJUST THE NOZZLE WHILE THE TRIGGER IS
SQUEEZED.
RECOMMENDED CLEANINIG PROCEDURE
- Dissolve dirty by applying detergent with the fan jet to the dry
surface. On vertical surfaces, work from the bottom upwards.
Leave the detergent to act tor 1 to 2 minutes, but do not allow to
dry out. Apply the high from the surface, working from the bottom
upwards.
- Avoid allowing the rinsing water to run on to unwanted surfaces.
STORAGE
- Switch off the washer.
- Turn off the water supply tap.
- After use, the detergent residuals should be removed from the
tank.
- Discharge residual pressure by pressing the trigger until no more
water comes out of the lance nozzle.
- Engage the gun safety lock.
- Remove the plug from the socket.
20
Induction High Pressure Washer 160bar