Mains Power Connection - Ronix Rp-1160 Bedienungsanleitung

the manufacturer or his service agent or similarly qualified person
in order to avoid a hazard.
- All keep the machine on a stable and flat surface during
operation, handling, transportation and storage. Sudden
overturn of machine will cause injury to body.
- In the event of accident or breakdown, switch off
the machine immediately. (e.g. contact with detergent: rinse
with an abundance of clean water.
ATTENTION:
Through poor conditions of the electrical MAINS, shortly voltage
drops can appear when starting the EQUIPMENT. This can
influence other equipment (e.g. Blinking of a lamp).
If the MAINS-IMPEDANCE Zmax < 0.335 OHM, such disturbances
are not expected. (In case of need, you may contact your local supply
authority for further information.)
WARNING!
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment – grounding conductor
can result in a risk of electrical shock. Check with a qualified
electrician or service person if you are unsure if an outlet is prop-
erly grounded. DO NOT modify the plug provided with the appli-
ance to fit an outlet, have a proper outlet installed by a qualified
electrician.
.

MAINS POWER CONNECTION

The following should be observed when connecting the high
pressure washer to the electric installation:
- The electric installation shall be made by a certified electrician
and comply with IEC-364.
It is recommended that the electric supply to this appliance should
include either a residual current device that will interrupt the supply if
16
Induction High Pressure Washer 160bar