Anker Nebula Capsule Bedienungsanleitung Seite 8

EN
[Auto Keystone Enable / disable
Correction)
keystone correction.
Correct keystone manually.
(KeystoneCorrection)
Default
[Front], The device is located
in front of the projection
surface.
[Rear]. The device is located
behind the projection surface.
(Front Ceilingl The device
is hanging from the ceiling
in an upside down position.
[projector mode]
he image IS rotated by 180
degrees.
[Rear Ceiling] The device
is hanglng from the celling
in an upside down position
behind the projection
surface The •mage is
rotated by 1 80 degrees and
horizontal
4. App Manager
O) Press to access
[Settings] > (App Manager] and press
@ Select an app and check the current version,open
or force stop, check the storage used or clear data, or
uninstall it.
When more than 3 apps are installed, you can
select [All] at the bottom line of the home page
to enter the [Appsl page. Select an app and
press — in the remote control, and then you
can select [Move To Homel or [Uninstall]
auto
value is O.
mirrored.
the home menu, select
0K
5. Other
to access the home menu, select (Settings]
Press
find more settings.
(General]
Select an on-screen display
[Languagel
language.
(KeypadTone]
Turn on / off the keypad tone.
[Automatic Sleep
5 min / 15 min / 30 min
Interval]
[Background] Select a background.
IDate&Time]
[Automatic
Enable / disable
Date&Time] and time.
(Date]
Manually set date.
[Time]
Manually set time,
(Selecttime zonel Select time zone.
(Use 24-hour
Select 24-hour
format)
format.
[Upgrade)
Check if it is the latest version,
(CheckUpdate]
Follow the on-screen
to upgrade the software version.
[About]
All data On the built-in Storage
[Recovery]
will be erased.
EN
automatic date
format or 12-hour
instructions