Method Of Changing Passwort; Ts Cal - ZENEC ZE-NC514 Benutzerhandbuch

SETUP
Source
Select one playing source that you want to set relative volume.
Level
You can set relative volume level from 0 to 6.

METHOD OF CHANGING PASSWORT

1. Locate the cursor on the "Anti-PSW" option, press the numeric keys on the remote
control or touch the "Anti-PSW" option directly to open the onscreen keypad. Touch the
numeric buttons to enter the factory default code "012345" to deactivate the anti theft
function.
2. Repeat the operation above to enter a new 6 digit password and confirm by pressing the
enter button. Your new personal password becomes effective and the unit will be locked
when disconnected from power.
PLEASE NOTE:
Do use a code you can easily remember. Unlock the unit is not free of charge and can
only be done by an authorized ZENEC service center.

TS CAL

When the touch function is not sensitive or valid, you should calibrate the touch screen
by this function.
Calibrate the touch screen just following the screen introductions after entering the TS
CAL mode.
35
ZE-NC514