Herunterladen Diese Seite drucken

Comedes Demecto 12 Bedienungsanleitung Seite 32

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Humidity setting:
The unit is equipped with a modern hygrostat (humidity controller) and switches off
automatically after reaching the desired humidity in order to save energy. The compressor
switches off first and then the fan 30 seconds later. When the humidity in the room rises again,
the Comedes Demecto 12 switches on automatically.
By repeatedly pressing the button, the target humidity can be set between 30% and 80% in
5% steps.
The set target humidity is now shown on the display for approx. 5 seconds.
To have the current room temperature shown on the display, press and hold this button until
the room temperature is shown. After approx. 5 seconds, the display shows the current room
humidity again.
The dehumidifier starts dehumidifying when the room humidity is at least 3% higher than the
set target humidity.
Timer:
Press the timer button to start the timer function. By pressing repeatedly, you can set a time
of 1-24 hours in 1 hour steps. If the timer is activated, this is indicated by the corresponding
symbol on the display.
If you activate the timer during operation, the appliance switches off after the set time.
If you activate the timer while the unit is in standby mode, the unit will start automatically
after the set time has elapsed.
To switch off the timer, press the button repeatedly until "00" is displayed.
Speed:
Press this button to switch between the two fan speeds.
The currently selected fan speed is shown on the display.
Child safety lock:
Press and hold this button to activate the child lock. No more settings can be made. If the child
lock is active, this is indicated by the corresponding symbol on the display. Press and hold this
button again to deactivate the child lock. When the unit is restarted after a power failure or
similar, the child lock is always deactivated.
3-colour humidity display
Blue: Humidity <45%
Green: Humidity 45%≤RH≤65%
Red:
Humidity >65%
If an error or status message appears on the display, the humidity indicator lights up red.
EN-11
www.comedes.com

Werbung

loading