DJI RC Motion 3 Bedienungsanleitung Seite 3

Power Button
9.
Press once to check the current battery level. Press once then again and hold
to power the motion controller on or off.
Using for the First Time
Charging
1.
Powering on
2.
Check battery level: press once.
Power on/off： press then press and hold for 2 seconds.
Linking
3.
The motion controller must be linked with the goggles. Make sure that all devices
are powered on before linking.
a) Press and hold the power button of the aircraft until the battery level LEDs
start to blink in sequence.
b) Press and hold the power button of the motion controller until it beeps
continually and the battery level indicators blink in sequence.
c) The motion controller stops beeping when linking is successful and both the
battery level indicators turn solid and display the battery level.
4. Activation
Power on the aircraft, goggles, and motion controller. Make sure all the devices are