DJI RC Motion 3 Bedienungsanleitung Seite 2

Overview
Battery Level LEDs
1.
Lock Button
2.
Press twice: start the motors of the aircraft. Press and hold to make the aircraft
automatically take off, ascend to approximately 1.2 m, and hover. Press and
hold while hovering to make the aircraft automatically land and the motors to
stop.
During flight, press once to make the aircraft brake and hover.
Joystick
3.
Use the joystick to control the aircraft to move in the direction relative to the
center of the FPV view.
Mode Button
4.
Press once to switch between Normal and Sport mode.
Press and hold to initiate RTH. Press again to cancel RTH.
Shutter/Record Button
5.
Press once to take photos or start or stop recording. Press and hold to switch
between photo and video mode.
Accelerator
6.
Press to fly the aircraft in the direction of the circle in the goggles.
Push the accelerator out to fly the aircraft backward.
Apply more pressure to accelerate.
Dial
7.
Toggle to control the camera zoom in or out.
USB-C Port
8.
For charging or connecting the motion controller to a computer to update
firmware.