Ronix RC-2510 Bedienungsanleitung Seite 31

Use clean cloths to remove sort, dust, oil, grease, etc.
AS a routine part of air compressor maintenance, it is also advised that the
oil is routinely checked for proper levels.
WARNING!
Do not at any time let brake fluids, gasoline, petroleum- based products,
penetrating oils, etc., come in contact with plastic parts, Chemicals can
damage, weaken or destroy plastic which may result in serious personal
injury.
Electric tools used on fiberglass material, wallboard, speckling compounds,
or plaster are subject to accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly abrasive to bearings,
brushes, commutators, etc. Consequently, we do not recommend using this
product for extended work on these types of materials.
However, if you do work with any of these materials, it is extremely important
to clean the product using compressed air.
BEARING LUBRICATION
All of the bearings in this product are lubricated with a sufficient amount of
high grade lubricant for the life of the unit under normal operating con-
ditions. Therefore, no further lubrication is required.
REPLAING THE AIR FILTER
1- Turn the air filter cover counterclockwise approximately one quarter
turn.
2- Remove the cover
3- Remove the air filter.
29
User Manual