will shut off when the pressure reaches the preset maximum.
2- Turn the air compressor off.
3- Pull the ring on the safety valve to release air for three to five seconds.
4- The ring pin must be pushed back into position to stop the flow so air
at high pressure.
WARNING!
If air leaks after the ring has been released, or if the valve is stuck and
cannot be actuated by the ring, do not use the air compressor until the
safety valve has been replaced. Use of the air compressor in this
condition could result in serious personal injury.
MAINTENANCE
WARNING!
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause product damage.
WARNING!
Always wear eye protection with side shields. Failure to do so could
result in objects being thrown into your eyes resulting in possible
serious injury.
WARNING!
Always release all pressure, all pressure, disconnect from power supply,
and allow unit to cool to the touch before cleaning or making repairs on
the air compressor.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents
and be damaged by their use.
28
Air Compressor 25L