Ronix RC-2510 Bedienungsanleitung Seite 25

WARNING!
Do not connect to power supply until assembly is complete. Failure to
comply could result in accidental starting and possible serious personal
injury.
CHECKING THE OIL
Always check the oi; when the unit is sitting on a level surface and
before first use.
1- The sight glass is located above the tank. There is a red dot in the
center of the glass.
2- An oil level at the top of the red dot indicates oil is at maximum level.
3- An oil level at or below the bottom of the red dot indicates oil is below
desired level, and oil should be added
TO ADD OIL:
1- Unscrew the cap of oil fill hole.
2- Using a funnel, carefully pour oil into the oil fill hole.
3- Tighten the cap securely into the oil fill hole.
NOTE:
Avoid too much oil. Ensure that the level of the oil does not exceed the top
of red dot at sight glass.
23
User Manual