Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Rear wheels assembly
First, ensure the rear axle is in the centre of the car. Confirm that the lengths extending
out on both sides of the axle are equal.
On each side of the rear axle, there is an 8mm washer and a nut. Using the wrench ⓬,
remove the nuts from the rear axle, then take off the 8mm washers.
Next, insert the two rear wheels ❼ along with the 8mm washers onto the rear axle.
Using the wrench ⓬, securely fasten the nuts. Whilst applying pressure, lock the wheel
covers ❽ into the grooves on the rear wheels ❼.
8mm washer
nut
Attention:
After installing one rear wheel, flip the car body over, ensuring the installed wheel is
touching the ground. Pull out the rear axle until it can no longer move, then start
assembling the other wheel.
3. Windshield assembly
Position the windshield ❾ so that it aligns with the corresponding openings on the car
body, then gently insert and push it into place.
4
Werbung
