Smartphone App Bluetooth Control; Technical Data; If It Does Not Function - Fischertechnik Plus Bedienungsanleitung

B C
l u e t o o t h o n t r o l

10 Smartphone App Bluetooth Control

With the Smartphone App Bluetooth Control (for Version 5.0 Android and higher and iOS), one
or two receivers can be controlled using the Smartphone. This App can completely replace the
transmitter and offers the same scope of functions. The App is available for free in the respective
Playstore/App Store.

11 Technical Data

Control Set for control of 3 motors and 1 servo
Frequency band Bluetooth
Max. emitted transmission power
Range
Transmitter power supply
Number of possible receivers per transmitter
Number of possible pairs (each transmitter + receiver) in one room
without interfering with each other
Receiver power supply
Receiver output power load

12 If it does not function...

The LEDs of the transmitter and receiver emit various flash codes, which signal the respective
operating state.
LED on transmitter
LED lit continuously
LED flashes 1x per sec.
LED flashes approx. 2x per sec.
LED does not light after
switching on
S o
e t p e r a t i n g m a n u a l
Description
Battery voltage OK The transmitter is paired with the receiver
Transmitter is not paired with any receiver
The battery is almost empty and must be replaced. The full range is
no longer guaranteed
The battery is empty, battery not correctly plugged in. Transmitter is
faulty (contact fischertechnik Service)
2,402 – 2,480 GHz
1,37 mW
10 m
9 V block battery
2
as many as desired
9 V Accu Set
per output, max. 0,8 A
23