Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE STARTING JOURNEY
Mechanical safety check:
Before using the SCOTEX H20: Perform a visual inspection for any loose screws and
other parts. Make sure everything is in place and no parts are missing or showing
severe wear. If you are unsure, be sure to contact your dealer or technical support
immediately!
Preparation
1. search for suitable terrain
2. unfold scooter according to instructions (p.12)
Driving off
Press the POWER
button to switch on the scooter.
2. Place one foot on the footboard and keep the other foot on the ground.
3. slowly and carefully press down the right thumb throttle - the scooter will
immediately move slowly forward. Take the second foot off the ground and place it on
the footboard as well. The more the thumb throttle is pressed, the more the scooter
accelerates and the faster the ride.
Braking
1. The left hand brake operates the brake on the rear wheel
2. The e-scooter has a brake lever attached to the right handle, which can be used to
operate the drum brake on the front wheel.
Kick start function
This function is for your safety. When the scooter is to be used, you should kick / propel
it with one foot to start the scooter moving and then press the thumb throttle first and
the scooter will start moving with motor power. This protects the motor and prevents
the scooter from accidentally starting to move if the throttle grip is accidentally pressed.
| 8 |
MANUAL
Werbung
