Haier CA0100HANH Installationsanleitung Seite 327

Clique no ícone "LEVEL 2 PARAMETERS" para entrar na tela de configuração da unidade. Você pode ativar ou
desativar a funcionalidade nessa tela.
Funcionalidade
Lower limit of Zone2 total chilled water outlet temp. (COOL)
Lower limit of Zone1 total chilled water outlet temp. (COOL)
(The set temp. of Zone1 is low of 5℃， it will show " Verify that 25%
antifreeze has been added")
Upper limit of Zone2 total chilled water outlet temp. (HEAT)
Upper limit of Zone1 total chilled water outlet temp. (HEAT)
Upper limit of tank temp. (DHW)
Interface type
Anti-freezing temp. protection
Limit of defrosting entry temp.
Defrost control parameters
Defrosting method selection
Defrost maximum time interval
Cooling startup temp. deviation
Heating startup temp. deviation
Cooling shutdown temp. deviation
Heating shutdown temp. deviation
DHW startup temp. deviation
DHW shutdown temp. deviation
The Temperature Variation rate of startup
Inlet water temp. change value
Outlet water temp. change value
Time of system startup interval
Time of system standby interval
Water system type
Solar
Travel Time of Mixing Valve
DHW
Parâmetros secundários
Figura 24
Tabela 3 Função de configuração do sistema pelo usuário
Faixa de parâmetros
10℃~20℃
-5℃~10℃
35℃~60℃
35℃~60℃
35℃-58℃
Central controller/PC monitoring
-30℃~9℃
7℃~18℃
0.00~2.00
Asynchronous/Synchronous
1h~10h
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
0℃~5℃
1s~300S
1s~300S
Closed/Open
On/Off
30~240S
On/Off
36