Paddle Shifter Force Setting - Ascher Racing B24L Produktanleitung

10. Paddle Shifter Force Setting

- paddle shifter snap action force is set by the combination of magnets and spacers
- do not let magnets smash into each other – magnets are very brittle and can break
- to pull out installed magnets, put additional magnets carefully on top
- press the paddle shifter to separate installed magnets
- pull out top and bottom magnet
- magnets can be separated the best by shearing them off
- 4 pcs 3mm magnets & spacers can be found in the packaging foam insert
- approx. actuation force depending on magnet height and spacers:
•
800g = 5mm + 5mm (factory default)
•
570g = 5mm + 5mm + 1 spacer
•
480g = 3mm + 3mm
•
440g = 5mm + 5mm + 2 spacers
•
340g = 3mm + 3mm + 1 spacer
•
260g = 3mm + 3mm + 2 spacers
ENGLISH | GERMAN
6 | p a g e