Paddle Shifter Force Setting; F64-Sc V3 Dimensions - Ascher Racing F64-Sc V3 Produktanleitung

9. Paddle Shifter Force Setting

The paddle shifter snap action force can be reduced by using the supplied alternative magnets and
spacers. Use those alternative magnets to carefully pull out the installed ones – if unsuccessful pull the
paddle shifter in order to reduce the force between the installed magnets.
Make sure that no loose magnets are in close proximity in order to avoid magnets crashing into each
other unintentionally.
Depending on the installed combination, the shifter force will be approximately:
•
800g = 5mm + 5mm (factory default)
•
570g = 5mm + 5mm + 1 spacer
•
480g = 3mm + 3mm
•
440g = 5mm + 5mm + 2 spacers
•
340g = 3mm + 3mm + 1 spacer
•
260g = 3mm + 3mm + 2 spacers

10. F64-SC V3 Dimensions

ENGLISH | GERMAN
14 | p a g e