ASCHER RACING F64-SC V3 Produktanleitung Seite 10

ENGLISH | GERMAN
1
2
4
Deadzones need to be adjusted so that a resting paddle has 0% output whereas a fully pulled paddle
results in 100% output.
The position indicator shows the resulting output which is reported to the simulation. Raw value is the
absolute, unaltered value of the paddle.
Deadzone low defines the Raw value at which the output starts (0%). Set this value about 1% - 2% higher
than the Raw value of the resting paddle.
Deadzone high defines the Raw value at which the output ends (100%). Set this value about 1% - 2%
lower than the Raw value of the fully pulled paddle.
10 | p a g e