Zeit Und Datum; Fernbedienung; Kalibrierung; Time And Date Menu - Strebel Varan 1.14 Bedienungsanleitung

Varan 1.14, 1.20
Beispiele für eingestellte Heizzeiten im„Program"-Untermenü

6.10 Zeit und Datum

Wählen Sie die aktuelle Zeit bzw. das Datum mit P4 (^) bzw. P6
(v) an und bestätigen Sie die Auswahl mit P3 (SET).
Mit P1 (ESC) verlassen Sie die Einstellung.

6.11 Fernbedienung

Aktivieren bzw. Deaktivieren Sie die Verbindung zur
Fernbedienung.

6.12 Kalibrierung

Hier kann die Schneckenlaufzeit (Auger) und der Ge-
bläsedrehzahl (Fan) angepasst werden. Es stehen 10
Kalibrierungsstufen zur Verfügung (ab Werk ist „0"
eingestellt). Die Erhöhung/Senkung des Wertes um
„1" entspricht jeweils „1%" ( der Prozentwert kann
angepasst werden: „Kalibrierungsstufe" im System-
Menü).
Der Kalibrierungseffekt ist nur im Betriebsmodus und
in der Pellet-Modulation aktiv.
22
8.2.8 Combustion Recipe Menu
Menu to select the Combustion Recipe. The maximum value is the number of recipes visible to the user. This
value can be set in System Menu
isn't visible.
8.2.8 Combustion Recipe Menu
Menu to select the Combustion Recipe. The maximum value is the number of recipes visible to the user. This
8.2.9

Time and Date Menu

value can be set in System Menu
This Menu allows to set time and date. Push the button P4 and P6 to select hours, minutes, year, month
isn't visible.
and day. Push P3 to enter editing, P4 and P6 button to change the value. Push P3 to save and P1 to exit.
8.2.9 Time and Date Menu
8.2.10 Remote Control Menu
This Menu allows to set time and date. Push the button P4 and P6 to select hours, minutes, year, month
This Menu allows to enable or disable the Remote Control SYTX.
and day. Push P3 to enter editing, P4 and P6 button to change the value. Push P3 to save and P1 to exit.
Time and Date
Remote Control_______
8.2.10 Remote Control Menu
Calibration
This Menu allows to enable or disable the Remote Control SYTX.
Load
Time and Date
Language
Remote Control_______
Calibration
Load
8.2.11 Calibration Menu
Language
This Menu allows to modify the Combustion Fan's speed and the Auger's work time set by factory. It has two
Submenu.
Time and Date
8.2.11 Calibration Menu
Remote Control
This Menu allows to modify the Combustion Fan's speed and the Auger's work time set by factory. It has two
Calibration
Submenu.
Load
Time and Date
Language
Remote Control
Calibration
The system has 10 calibration's steps (the 0 value is set by the factory). For each step the value is increased
or decreased of a per cent value (the per cent value is set in the Step Calibration Menu of System Menu).
Load
The calibration's effect is valid only in Run Mode and in Modulation for the current recipe.
Language
The system has 10 calibration's steps (the 0 value is set by the factory). For each step the value is increased
8.2.12 Load Menu
or decreased of a per cent value (the per cent value is set in the Step Calibration Menu of System Menu).
This menu allows load manually the Auger or the brazier.
The calibration's effect is valid only in Run Mode and in Modulation for the current recipe.
Time and Date
Remote Control
8.2.12 Load Menu
Calibration
This menu allows load manually the Auger or the brazier.
Load
Time and Date
Language
Remote Control
Calibration
The loading stops automatically after 600 seconds.
loading.
Load
NOTE: when the auger is manually started the Exhaust Fan switches on in order to close pins 13-14 (HV2)
Language
for the power supply of the auger.
Modelländerungen vorbehalten.
Maße unverbindlich!
The loading stops automatically after 600 seconds.
loading.
NOTE: when the auger is manually started the Exhaust Fan switches on in order to close pins 13-14 (HV2)
Kesselregelung
Default Settings (parameter P04). If the parameter
Default Settings (parameter P04). If the parameter
_____
_____
__________
The system has to be in Off State to do the
__________
The system has to be in Off State to do the
P04
P04
Remote Control
Enable
Remote Control
Disable
_
Enable
Disable
_
Auger Calibration
Fan Calibration
Auger Calibration
Fan Calibration
Load
ON
Load
OFF________________
ON
OFF________________
= 1 the Menu
= 1 the Menu