Werbung
4. Commissioning
Pay attention to the ambient conditions listed in 8. Technical
data.
If the above procedures are not followed, safe operation cannot
be guaranteed and/or the equipment may be damaged.
5. Switching on
Before using the appliance for the first time,
carefully read sections 15. Electrical safety
requirements
safety requirements, which detail the essential
electrical safety requirements and electromagnetic safety
requirements, and 8. Technical data, that provides
information on location, storage and transport requirements
in order to avoid malfunctioning or damage to the appliance,
operator or others
1- Press the "Power" button to switch on the device. The startup
screen will be displayed for several seconds. This screen shows
the software version.
MAGNETIC STIRRER
VARIXIO Pro Mag
Version 0.0.X
2- After some seconds, the capsule selection screen will appear,
and the device is ready for operation. At this point, the device is
ready for the user to navigate through the menu and select the
Capsule Type
Air
Low N2
INSTRUCTIONS FOR USE
If these conditions are met, the unit is ready
for operation once the power supply unit has
been plugged in.
and
16.
Electromagnetic
EN
7
Werbung
