Werbung
EN
No panel or cover must ever be removed, except by personnel
authorised by the manufacturer. VARIXIO
be left switched on, left open or unattended during maintenance
of the system.
Please contact the manufacturer if for any reason the device
causes tripping of the protection switch of the local power supply.
16. Electromagnetic safety
requirements
VARIXIO
the harmonized standard for Electromagnetic Compatibility
(EMC) which states that electronic equipment must not emit
electromagnetic interference that may affect radio services or the
essential operation of other devices. Electronic equipment must
have adequate immunity to radio frequency (RF) interference in
order to offer basic safety and normal operation in the presence
of electromagnetic interference.
VARIXIO
emissions or reduce the immunity of VARIXIO
correctly.
16
WARNING: If the problem persists always
contact the technical service authorised by the
manufacturer.
Pro Mag has been designed in compliance with
®
Pro Mag requires special precautions
VARIXIO
®
with respect to EMC and must be installed and
operated in accordance with the information
provided about EMC. Portable and mobile
RF communication equipment may affect the
®
Pro Mag appliance during normal operation.
Only the cables and accessories supplied by
the manufacturer must be used. The use of
accessories,
than those specified may cause an increase in
Pro Mag should not be used adjacent
VARIXIO
®
to or stacked on top of other equipment. If
this occurs, the VARIXIO
must be observed to check that it is operating
®
Pro Mag must never
transducers
and
®
Pro Mag appliance
cables
other
®
Pro Mag.
Werbung
