Switch Ghg 265 - Eaton 20 A GHG 262 Betriebsanleitung

Dimensions in mm
GHG 265.., 125 A 3-pole
GHG 266 ..., 180 A 3-pole
X = fixing dimensions
Explosion-protected switch
20 A - 180 A
1�7 Switch GHG 265 ��� (125 A)
EC type examination certificate:
Marking acc. to 2014/34/EU and standard:
IECEx certificate:
Category of application:
*The IP Degree of protection class can be mentioned separately on the type lable.
Rated voltage:
Rated current:
Perm. short circuit back-up fuse:
Switching capacity AC 3:
Cable entries (standard version):
suitable cables and test torques of the pressure screw
Cabel entry:
Seal 1+2+3
1 2
3
(Ø mm / Nm)
Seal 1+2
1 2
3
(Ø mm / Nm)
Seal 1
1 2
3
(Ø mm / Nm)
Test torque for screw in thread cable entry (Nm): 3.0
(1)
The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can
vary by using cables with different manufacturing tolerances and material properties. Please use a suitable
combination of seals in the intermediate area, so that the cap nut can be tightened in future maintenance
work on the cable entry.
Terminals:
Test torque terminals:
Weight (standard version):
PTB 99 ATEX 1164
EN 60079-0
II 2 G Ex d e IIC T6
II 2 D Ex tD A21 IP66* T80 °C
IECEx BKI 07 .0005
IEC60079-0 Ex d e IIC T6
Ex tD A21 IP66* T53 °C
690 V, 50/60 Hz
125 A
up to U 400 V up to U
N
200 A/gG
125 A
3-pole version
2 x M63 + 1 x M25
M25
min. 8.0 / 1.5
(1)
max. 10.0 / 2.0
min. 10.0 / 2.3
(1)
max. 13.0 / 2.6
min. 13.5 / 1.3
(1)
max. 17 .5 / 2.3
2 x 4.0 - 70 mm²
max. 1 x 120 mm²
6.0 Nm
3-pole version: approx. 16.00 kg
GB
500 V up to U 690 V
N N
200 A/gG 160 A/gG
125 A 110 A
6-pole version
-
M63
29.0 / 12.0
35.0 / 12.0
36.0 / 12.0
41.0 / 13.0
7 .5
observe current load
(use cable lugs supplied with switches)
17