Roidmi EVA Benutzerhandbuch Seite 9

Notice:
Avoid using this appliance around infants or pet rooms and keep it away from
•
infants and pets to avoid danger.
In order to facilitate the appliance to smoothly return to the base station after
•
cleaning, it is recommended that the cleaning start-point be from the base
station. Do not manually move the clean base station during the cleaning
process.
The base station has the functions of collecting dust, charging, cleaning and air-
•
drying the mop. A new dust bag has already been installed before leaving the
factory.
The base station should be placed horizontally on a non-carpet floor that is more
•
than 1.5m away from the carpet.
When the map is first started, the appliance starts from the base station to
•
improve the efficiency of map creation.
App Installation and Use
ROIDMI app installation
This appliance is compatible with the ROIDMI Platform, and can
be controlled by the ROIDMI app. It supports both Android and
iOS systems.
First, scan the QR code or search for "ROIDMI" on the app store
to download and install the ROIDMI app. Next, sign into the app.
Long press the Home and Power buttons on the robot cleaner at
the same time for longer than 3 seconds to reset it. Click "+" at
the upper right corner of the app's homepage to add device. Select the robot cleaner
from the device list and connect it to Wi-Fi according to the prompts.
Mi Home app installation
This product works with mijia (Mi Home). It can be controlled via
Mi Home app and interconnected with other smart devices.
First, scan the QR code, or search for "Mi Home" in the app store
to download and install the app. Next, turn on Mi Home app,
register an account or sign into the app. Then long press the
Home and Power buttons on the robot cleaner at the same time
for longer than 3 seconds to reset it. Click "+" in the upper right
corner on the app's homepage to add device. In the device category list find the "Robot
Cleaner" category, then click your ROIDMI robot cleaner model to enter Network
Configuration interface. Perform follow-up operations according to the app's prompts
on network configuration.
9