Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Status light
Alternating red and
green flashing.
servicing
and
Cleaning
Cleaning and servicing
To keep your appliance working efficiently
servicing
and
Cleaning
for a long time, it is important to clean and
maintain it carefully.
Emptying the filter container
Once the washing programme has ended
and the appliance's status light lights up
red, empty the filter container.
Note: The filter container is full after approx.
20 washing cycles.
Hold the filter container by the recessed
1.
grip and remove it fully to the front.
→ Fig.
8
Wipe the filter housing dry.
2.
Remove the filter cover from the filter
3.
container by turning it anticlockwise.
→ Fig.
9
Remove the scraper from the filter cover.
4.
→ Fig.
10
Loosen the contents of the filter con-
5.
tainer using the scraper and dispose of
this with household waste.
Note: To prevent the wastewater from
being contaminated with microplastics,
do not rinse out the filter container with
water.
Attach the scraper in the filter cover.
6.
Attach the filter cover to the filter con-
7.
tainer.
Slide the filter container into the filter
8.
housing from the front.
a The status light lights up green and a sig-
nal sounds.
Note: If the status light lights up red and
green alternately, the filter container has not
been inserted fully.
Information
Several causes are
possible.
→ Page 11
Remove the filter
container and rein-
sert it.
Cleaning and servicing en
Cleaning the filter net and rotary head
Clean the filter net and rotary head if the
status light lights up red after the filter con-
tainer has been emptied.
Hold the filter container by the recessed
1.
grip and remove it fully to the front.
Remove the filter cover from the filter
2.
container by turning it anticlockwise.
Loosen the filter net by turning it anti-
3.
clockwise, and carefully lift and remove
the middle filter.
→ Fig.
11
Lift and remove the rotary head.
4.
→ Fig.
12
Clean the filter net and the rotary head
5.
with a commercially available small
brush and a damp cloth.
Insert the rotary head.
6.
Insert the filter net.
7.
→ Fig.
13
Align the partition wall of the filter net
with the partition wall of the filter con-
tainer.
Attach the filter cover to the filter con-
8.
tainer and push the filter container into
the filter housing from the front.
Troubleshooting
Troubleshooting
You can rectify minor faults on your appli-
Troubleshooting
ance yourself. Read the troubleshooting in-
formation before contacting after-sales ser-
vice. This will avoid unnecessary costs.
▶ Never make any technical modifications
to the appliance or its features.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
The status light flashes red and green
alternately.
The filter container is not inserted correctly
or the pumps are locked.
Remove the filter container and reinsert
▶
it.
11
Werbung
