Klarstein 10028687 Bedienungsanleitung Seite 14

LCD display
Plug the electrical power; switch on the electrical button in
housing back. When SS jar is not well placed or top switch
is not well switched, LCD would display as. When SS jar
is well placed and top switch is well switched, LCD would
display as. Time, temperature and speed can be adjusted
under this condition.
Note:
For safety consideration, when cover is not well covered,
top switch can not be switched to the right place. Please do
not switch it by force.
After that, Put the jar into
the housing in right direc-
tion, hold the handle of
SS jar and turn the SS jar
anti-clockwise slowly to
right site.
How to take off SS jar correctly
1. Press Start/Stop button to stop the machine, then hold the handle
of SS jar.
2. Turn clockwise the SS jar slowly from place to place and then the SS
jar can be taken off from housing.
3. Finally, press the cover release button till unlock the lock buckle tho-
roughly. The jar cover could take it off after finished .
Then, plug the pow-
er cord; switch on the
electrical button on
the back bottom of the
housing(Figure7). Set
time, temperature and
speed on control panel,
then press Start/Stop to
start the machine.
14