Icy Box IB-RP106 Schnellinstallationsanleitung Seite 8

Quick installation guide IB-RP106
2. Fasten 4x spacers-A to the corresponding Raspberry Pi
position on the bottom acrylic with 4x screws-B.
3. Fasten your Raspberry Pi
acrylic with 4x silver screws-C. Remove the foil from the corresponding
heatsinks and stick them on the CPU and IC chipset as displayed.
to the pre-installed spacers-A at the bottom
®
4. Fasten the fan to the top acrylic
screw hole
®
with 4x silver screws-D and
4x nut-E. The label should point
upwards (outside).