Faytech LAPSCREEN Bedienungsanleitung Seite 8

OPERATING INFORMATION
Connecting the Device
[A] connect to a USB Type-C device
Connect the delivered USB Type-C cable to
1. Your USB Type-C source
2. Your LAPSCREEN connector 1. Signal - USB Type-C
The LAPSCREEN will automatically turn on and once the signal is connected show
the picture delivered by your USB Type-C source. Optionally your Type-C source can
be charged if you additionally connect a power-source to the 3: Power USB Type-C
connector.
[B] connect to an HDMI-source
1. connect an HDMI-cable to the LAPSCREEN 2: signal-HDMI and to your
HDMI-source.
2. connect a power-source to the 3: Power Type-C connector (within USB Type-C
specifications)
The LAPSCREEN turns on automatically and displays the image supplied by your
HDMI source after connecting the cable.
Operation
The LAPSCREEN is easy to operate - it needs power and a signal, that´s all. The
power MUST come via USB-C, the video/picture signal need to come via USB-C OR
HDMI. The rest happens automatically.
The LAPSCREEN has NO loudspeaker. When you connect your device to the
LAPSCREEN, make secure that you choose another sound-source than the
LAPSCREEN. In general, a Laptop or a mobile will automatically switch the Audio-Out
to the connected LAPSCREEN via USB-C or HDMI. For many mobiles the audio
setting is limited - in this case you may need to connect earphones to hear a sound.
English - 8