Placing; Prescriptions; Place Of Installation; Distances - Wamsler PRIMO 108 71 00 Bedienungsanleitung

2. Placing

2.1 Prescriptions

For installation and for connection of flue, the requirements of the Fire Regula-
tions (FeuVO in Germany) apply, as well as local building regulations such as
the following technical standards DIN 18896, DIN 4705, EN 13384, DIN 18160,
EN 1856-2 and EN 15287. In order for the stove to function correctly the chim-
ney to which you want to connect the stove must be in good condition.

2.2 Place of installation

The stove draws the air required for burning from the surrounding room. You
must ensure that sufficient air can be drawn in through non-sealed windows
and outside doors. In addition you must ensure that a room volume/heat capac-
ity ratio of at least 4 m³ per kW nominal heat capacity is available. If the volume
is less than this, then air vents can be used to provide access to further air
supply in other rooms (connecting vents min. 150 cm²).

2.3 Distances

All combustible equipment, furniture or e.g. decoration materials which are in
the close environment of the fire-place shall be protected from the heat.
Furnishings in the radiation area
Keep a minimal distance of 80 cm (A) between the front cover of the fire-place
and the combustible equipment, furniture or e.g. decoration materials.
The security distance can be lowered to 40 cm if a heat shield is put in front of
the object to be protected (B) (see our example on drawing no. 8).
Furnishings outside the radiation area
The walls beside and behind the fire-place shall not be made of combustible
materials and they cannot be covered by such materials, unless the distance
on the sides is more than 55 cm and behind is more than 30 cm.
Similarly to the wooden and plastic furniture on the sides a distance of 55 cm
shall be kept (see drawing no. 9).
B
A
Pic. 8
Pic. 9
27