VEVOR SS-PAC02A Bedienungsanleitung Seite 16

2) Setting the round shape
part into the column metal
part.
3. Setting the square part into
another end of round part.
Make sure there are no gaps
between each parts.
4.Using a tool to move the
piston back and forth and
rotate to make the internal oil
evenly spread.3-4 times will be
fine.
5.By turning square,round
shape part and piston, makes
the cylinder looks same as
[3.5]. Please note the direction
of each screw and piston
rod.Pull the piston rod distance
to the longest.
- 15 -