ECOVACS DEEBOT T20e OMNI Betriebsanleitung Seite 33

No. Malfunction
DEEBOT gets stuck while
9
working and stops�
During cleaning, DEEBOT
appears in the route disorder,
running bias, repeated
cleaning, small area leakage
10 and so on�
(If there is a large area that has
not been swept temporarily,
DEEBOT will make up the
leakage independently� )
EN 32
Possible Causes
DEEBOT is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc�)�
DEEBOT might be stuck under furniture with
an entrance of similar height�
Objects such as wires and slippers placed
on the ground affect the normal operation of
DEEBOT�
It may be that the Driving Wheels slips on
the ground when DEEBOT climbs steps,
thresholds and door bars, thus affecting the
its judgment of the whole house environment�
Work on freshly waxed and polished floors or
smooth tiles, resulting in less friction between
the Driving Wheels and the floor�
Due to different home environments, some
areas cannot be cleaned�
The TrueMapping Distance Sensor is dirty or
blocked by foreign matters�
Solutions
DEEBOT will try various ways to free itself� If it is
unsuccessful, manually remove the obstacles and restart�
Please set a physical barrier, or set a Virtual Boundary via
the ECOVACS HOME App�
Please tidy up the scattered wires, slippers and other
objects on the ground before cleaning� And reduce the
scattered objects on the ground as far as possible� If there
is any area leakage, DEEBOT will correct the leakage by
itself, please do not interfere (such as moving DEEBOT or
blocking the route)�
It is recommended to close the door of this area and clean
the area separately� After cleaning, DEEBOT will return to
the starting location� Please rest assured to use�
Please wait for wax to dry before cleaning�
Clean the home environment to ensure that DEEBOT can
enter for cleaning�
Wipe the TrueMapping Distance Sensor with a clean soft
cloth or remove foreign matters�