Hifonics MERCURY IV/800 Bedienungsanleitung Seite 18

ENGLISH
TECHNICAL SPECIFICATIONS
Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 4 Ohms bridged
Loudspeaker Impedance
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N
Input Sensitivity
Filter CH1/2
Crossover Modes
High Pass Filter
Filter CH3/4
Crossover Modes
High Pass Filter
Low Pass Filter
Bass Boost
Start-stop capability
High Level Inputs with EPS
Auto Turn On
Low Level RCA Inputs
Bass Level Remote Controller
Fuse Rating
Dimensions
All Specifications are subject to change
DISPOSAL
If you have to dispose the device, please note that no electronic devices may be disposed in the
household waste. Dispose the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.
18
MERCURY IV/800
4
Analog Class A/B
4 x 125
4 x 200
2 x 400
2 - 8 Ohms
3 - 44000 Hz
> 220
92 dB
< 0,01 %
Low Level: 6 - 0,15 V
High Level: 12 - 0,5 V
DUPE – HPF – FULL
10 - 4000 Hz
LPF/BPF – HPF – FULL
10 - 4000 Hz
50 - 4000 Hz
0 - 12 dB @ 45 Hz
Yes
Via the included 10-pin wire harness
Only in connection with High Level Inputs (DC Offset)
Yes
Yes
1 x 80 A (external)
205 x 46 x 388 mm