Intended Use - Notch Micro Pulley Bedienungsanleitung

ENG
WARNING
Activities involving the use of this
equipment are inherently dangerous and
carry a significant risk of injury or death.
You are responsible for your own actions
and decisions.
Before using this equipment, you must:
• Read and understand all instructions
for use.
• Understand, accept, and assume all risks
and responsibilities for all damage, injury,
or death that may result from use of this
equipment.
• Obtain the necessary training from
qualified and competent instructor in its
proper use.
• Fully understand and accept its capabili-
ties and limitations.
• Pulley should only be used by a person
trained and competent in its safe use.
If you cannot or do not want to this, do not
use this equipment.
We advise that you personally assume
the responsibility to learn the use and
the safety measures that apply to this
equipment. Remember that there is no
better ''instruction'' than that of a trained
instructor. Train in the use of this pulley,
verify that you have fully understood
how it works and if in any doubt, please
ask competent person! Don't make any
alterations or additions to the equipment
without the manufacturer's prior written
consent. Any repair shall only be made by
the manufacturer. The products shall not
be used outside its limitations, or for any
purpose other than that for which it is
intended. If there is reason to doubt your
fitness to safely absorb the shock from
a fall arrest, please consult your doctor.
MicroPulley_8x12_12042023.indd 11 MicroPulley_8x12_12042023.indd 11
Age and fitness seriously affect a worker's
ability to withstand falls.
LIMITATION ON USE
It is impossible to imagine and identify all
the ways this equipment can be misused. It
must be used only for the specific purpose
it was designed for; it must not be used in
any alternative purpose. Only the loading
in the "Correct" illustration is allowed.
Environmental conditions such as snow
or ice may effect the performance of
the pulley.

INTENDED USE

PPE is designed to protect against falls
from height. The pulley must always
be used with the two plates closed and
secured using a suitable connector. Con-
necting to only one sideplate is absolutely
forbidden. Care should be taken not to
load the pulley across its minor axis or
against its axles across a structure.
Pulleys with aluminum wheels should
not be used with steel wire cables due to
increased wear.
Prusik cordage must always have an
experienced person tending them. Never
allow a jammed prusik cordage to be
pulled in between the sideplates. This can
lead to bending or breaking of the pulley
and allow the rope to fall out.
Do not allow an object in between the
sideplates and never rig your system so
that the pulley is forced against something
that could break the sideplates or your
connector.
Pulley can lever against a connector and
break it, opening the connector and allow-
ing the pulley to fall out. Protect against
this condition.
Rope traveling through a pulley can pull
in hair, fingers, clothing, etc. causing injury
and jamming the pulley. Protect against
this condition.
11
12/4/23 11:26 AM 12/4/23 11:26 AM