Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do not
try to repair them yourself.
• Insert your terminal device with the back on the induction charger (B).
• Charging starts as soon as an effective induction field has been generated. The system
emits an acoustic signal. The current charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device's battery is fully charged.
• Remove your terminal device from the induction charger and disconnect the station from
the power supply.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
4