Installation; Getting Started And Operation - Hama Comfort Bedienungsanleitung

Do not put any bank cards or similar cards with magnetic strips, or other magnetically
sensitive objects, on the product. The data on the cards could be damaged or deleted.

4. Installation

You can install this induction charger in pieces of furniture such as desks, dressers, etc. (C)
• Before installation, make sure that there is an easily accessible power supply in the
immediate vicinity so that you can simply disconnect the device from the power supply
when it is not in use.
• Cut a hole that corresponds to the size of the charger in the installation surface and insert
the charger.
• We recommend using an appropriate hole cutter for the material to be cut, with a diameter
of 80 mm.

5. Getting Started and Operation

Note
• For charging a terminal device with the induction charger, your terminal device has
to be compatible with the induction charging technology. Please read the operating
instructions of your device.
• Please note that mobile phone sleeves, covers, etc. and other materials between the
induction charger and the backside of your terminal device disturb or prevent actually
the charging process.
• Connect the included Micro-USB cable to the Micro-USB input (1) on the induction
charger and to a suitable USB charger. Please refer to the operating instructions for the
USB charger used.
3