Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Selecting the ice cube size
1.
Press the SELECT button until the desired size
lights up according to the control light. "S":
small or "L": large.
2.
Press the ON/OFF button and start the ice
cube preparation.
If the ambient temperature is below 15°C, we
recommend selecting the smaller size of ice
cubes.
If the ambient temperature is higher than
30°C, we recommend selecting the large size.
For optimal performance, the temperature of
the water should be between 7°C and 35°C
and the ambient temperature between 15°C
and 38°C.
It takes longer to prepare larger ice cubes.
ICE FULL
Indicator lights up when the ice cube tray is full. Ice
cube preparation stops automatically.
1.
Remove the ice cubes from the ice cube tray
with the ice cube scoop.
2.
After 7.5 seconds, the ice cube preparation
restarts automatically.
9 Cleaning and maintenance
Regular cleaning and maintenance of the appliance
not only protects the environment and saves energy,
but also increases its service life. The following
description provides valuable tips.
WARNING
ELECTRIC SHOCK HAZARD!
Disconnect the appliance from the mains power
supply.
Never immerse the appliance in water for cleaning.
Do not use a steam cleaner for cleaning.
ATTENTION
DAMAGE TO PROPERTY
Improper cleaning of the appliance may
•
cause damage.
Do not use
•
•
Aggressive cleaning agents
Brushes with metal or nylon bristles
•
Sharp, metallic objects such as knives, hard
•
spatulas and the like. These can damage the
surfaces.
Do not put appliance parts in the dishwasher.
•
ADD WATER
The indicator lights up when the water tank is empty.
Ice cube preparation stops automatically.
1.
Remove the ice cube tray.
2.
Fill the water tank with lukewarm or cold
drinking water up to the MAX water level
indicator.
3.
Press the ON/OFF button and restart the ice
cube making cycle.
The appliance automatically starts making
ice cubes after about 20 minutes if the user
does not manually restart the ice cube
preparation after refilling the water.
Stop ice cube making
1.
As soon as the desired amount of ice cubes
has collected in the ice cube tray, simply stop
making ice cubes.
2.
Press the ON/OFF button.
3.
Remove the mains plug from the plug socket.
4.
Open the appliance cover and place the ice
cubes in a freezer.
5.
Do not store the appliance in a dry place until
it has reached room temperature.
If the appliance is not used for a long period of
time, first empty the water tank via the drain
plug (5).
For reasons of hygiene and safety, we
recommend that you always use the appliance
with fresh water.
Cleaning the appliance
It is important to wash and dry the appliance and all
components carefully after use to prevent bacterial
growth and the development of unpleasant odours.
Wipe the surface of the appliance with a soft,
•
slightly damp cloth.
Clean the vents with a brush.
•
•
Rinse the ice cube tray and ice scoop in warm
soapy water and dry carefully.
CLEAN - Cleaning the ice mechanism
1.
Position the appliance so that it protrudes 60
mm above the worktop/table. Ideally, slide it
over the sink.
2.
Unscrew the drain plug to allow residual water
to run out. Have a drip tray ready.
3.
Screw the drain plug back in.
4.
Fill the water tank with lukewarm or cold
drinking water up to the MAX water level
indicator.
5.
Press the ON/OFF button.
6.
Press the SELECT button to select the CLEAN
function.
The appliance starts the internal cleaning
cycle by pumping water.
The cleaning cycle takes about four minutes.
7.
Empty and dry the water tank if the ice cube
machine will not be used for a long time.
15
Werbung
