Ronix RP-U161 Bedienungsanleitung Seite 22

- Discharge residual pressure by pressing the trigger until no more water
comes out of the lance nozzle.
- Engage the gun safety lock.
- Remove the plug from the socket.
- Operate the washer with non-corrosive /non-toxic antifreeze before
storing for the winter.
WARNING!
BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WISH
PLAIN WATER. ANTI-FREEZE CAN DAMAGE PAINTWORK SO YOU
MUST ENSURE THERE IS NO ANTI-FREEZE LEFT IN THE SYSTEM
BEFORE USING IT AGAIN.
MAINTENANCE
CAUTION!
Before working on the washer, disconnect the lug from the power supply
socket.
1- to ensure good performance. check and clean the suction and detergent
filters after every 50 hours of operation.
2- clean the nozzle with tool provided. remove the lance from the gun,
remove any dirt from the nozzle hole and rinse.
TROUBLESHOOTING
Disconnect from the electrical power supply before carrying out user
maintenance or checking is correct functioning. To avoid unnecessary
disappointments, you should check the following before contacting the
service organization.
20
High Pressure Washer