- The washer is equipped with adjustable nozzle.
- Jet adjustment from pencil to fan.
WARNING!
DO NOT ADJUST THE NOZZLE WHILE THE TRIGGER IS SQUEEZED.
RECOMMENDED CLEANINIG PROCEDURE
CAUTION!
Using any bleach, chlorine or any cleaners containing acids, will cause
in machine destruction.
1- Fill the detergent bottle with appropriate detergent and connect the
adjustable nozzle to the lance and then to the gun. Pull forward the
nozzle head and put it in the Low pressure mode.
2- Now by pushing the trigger, detergents release automatically. Spray
it for 1-2minute, then by pulling backward the nozzle head and putting
it in the High pressure mode, you can wash the surface with clean and
High pressure water.
CAUTION! If the nozzle head is in Low pressure mode, the detergent
releases. or if it is in the High pressure mode, the High pressure water
releases.
STORAGE
- Switch off the washer.
- Turn off the water supply tap.
- After use, the detergent residuals should be removed from the tank.
19
User Manual