Electrical Shock Hazard - Ronix Rp-U161 Bedienungsanleitung

- if the power cord is damaged, it must be replaced by the manufacturer or
his service agent or similarly qualified person in order to avoid a hazard.
- Keep the machine on a stable and flat surface during operation,
handling, transportation and strong. sudden overturn of machine will
cause injury to body.
In the event of accident or breakdown, switch off the machine immediately.
(e.g. contact with detergent: rinse with an abundance of clean water)
ATTENTION!
Through poor conditions of the electrical MAINS, shortly voltage drops
can appear when starting the EQUIPMENT. this can influence other
equipment (e.g. Blinking of a lamp).
WARNING!

ELECTRICAL SHOCK HAZARD

Improper connection of the equipment grounding conductor can result
in a risk of electrical shock. Check with a qualified electrician or service
person if you are unsure if an outlet is properly grounded. DO NOT
modify the plug provided with the appliance to fit an outlet, have a proper
outlet installed by a qualified electrician.
IMPOTANT!
Only use water without any impurities. If there is a risk of running sands
in the inlet water (i.e. from your own well), an additional filter should be
mounted.
- Safety devices
- The unloader valve can reduce pressure if it exceeds preset values.
the spray gun features a looking device. When the pawl is activated, the
spray gun cannot be operated.
- Thermal sensor.
A thermal sensor protects the motor against overloading. Machine will
restart after a few minutes when the thermal sensor has cooled.
15
User Manual