Ronix RP-U161 Bedienungsanleitung Seite 20

Trigger
3- While keeping the trigger of the gun pressed, the on / off key on the
device Put it on.
OFF
4- If the output water flow is not uniform, remove the lance nozzle using
a special needle Clean the device.
5- Hold the spray gun firmly in your hand, the nozzle facing the surface
you want to clean You are holding and pulling the trigger of the gun.
NOTE:
If you release the trigger, the engine will stop. By pressing the trigger
again, the engine of the device it will start working. For added safety.
always allow a 5 second pause between releasing and pulling the trigger
again.
CORRECT USE OF STANDARD ACCESSORIES
18
High Pressure Washer