Ronix RP-U161 Bedienungsanleitung Seite 19

5- Fit the lance into the gun and rotate it until the two parts are completely
locked.
Nozzle Lance
Gun
6- Connect the gun to high pressure hose.
7- Connect the high pressure hose to the water outlet on the washer.
Water Outlet
8- Connect the water supply hose to female coupler. Then connect to
the water inlet of the washer. The supply hose must have an internal
diameter of at least 13mm (1/2 in) and must be reinforced. the water
supply must be at least equal to the washer delivery capacity.
OPERATION
1- Turn on the water supply tap fully.
2- Release the safety lock then press the trigger for a few seconds to
allow air to escape and discharge residual pressure in the hose.
17
User Manual