Disassembling And Assembling The Front Wheel - Scorpa 300 Sc-R Racing 2023 Bedienungsanleitung

MAINTENANCE PROCESSES

Disassembling and assembling the front wheel

A
B
84
WARNING
Place the motorcycle in vertical position and immobilise the
back part.
To remove the front wheel:
- Loosen the lower fork screws , on the right side.
- Remove the 2 screws
- Remove the disc protection, as well as the front
brake calliper.
- Unscrew the front wheel axis and remove it.
- Remove the front wheel.
- Align the wheel with the fork feet.
- Place the front wheel axis in position.
- Screw the front wheel axis.
- Tighten the 2 screws
- Place the calliper.
- Place the disk protection.
- Tighten the disk calliper screws
Front wheel axis
Front wheel axis flange screw
Front brake calliper screw
WARNING
While inserting the wheel, avoid damaging the disc with the
brake pads.
Once everything is assembled, check proper brake operation
before using.
A
.
B
on the axis flange.
A
.
B
M18 50Nm
M8 25Nm
M8 25Nm