Replacing The Brake Light; Checking And Adding Front Brake Fluid - Scorpa 300 Sc-R Racing 2023 Bedienungsanleitung

MAINTENANCE PROCESSES

Replacing the brake light

Checking and adding front brake fluid

A
WARNING
Conduct this operation with the ignition off.
Disassembly:
- Remove the 2 screws and washers that fasten
the plate.
- Unplug the cable terminals.
- Remove the brake light.
Type: since this is an LED light, it is advisable to
replace everything.
Reassembly:
- Conduct disassembly steps in reverse.
The front brake fluid tank is located next to the
handle. It has a small viewer to check the fluid level.
WARNING
Conduct this operation with the ignition off.
To add:
- Remove the two screws from the tank cover.
A
- Remove the inner seal.
- Fill with fluid.
Brake fluid type: DOT 4.
WARNING
The brake fluid level should be between 3 and 4 mm from the
upper lip.
75