Bosch MUMS2ER01 Gebrauchsanleitung Seite 35

Set the rotary switch to
7.
→ Fig.
15
a The drive slowly moves until the
correct parked position is reached.
Unplug the mains plug.
8.
Tips
¡ You can change the speed at any
time during processing or interrupt
processing.
¡ Clean all parts immediately after
use so that residues do not dry on.
Adding more ingredients
To add ingredients during pro-
1.
cessing, use the filling shaft in the
lid.
→ Fig.
16
To add large quantities, set the
2.
rotary switch to
Wait until the appliance stops.
Set the rotary switch to
3.
→ Fig.
15
a The drive slowly moves until the
correct parked position is reached.
Remove the bowl lid.
4.
→ "Removing bowl lid", Page 34
Add the ingredients to the bowl.
5.
Attach the bowl lid.
6.
→ "Attaching bowl lid", Page 34
Process the ingredients until you
7.
achieve the required result.
Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
Lift the protective cover of drive 2
1.
by the side lug and remove.
→ Fig.
17
Pull up the protective cover for
2.
drive 3 and remove.
→ Fig.
18
and hold.
⁠ .
and hold.
Cleaning and servicing en
Fitting drive cover
Position the protective cover for
1.
the drive 2 and press in place
firmly.
→ Fig.
19
Position the protective cover for
2.
the drive 3 and press in place
firmly.
→ Fig.
20
Markings and
up.
Note: Always close unused drives
with the protective covers.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.
Overview of cleaning
You can find an overview of how to
best clean the appliance and the
other parts here.
→ Fig.
21
must match
35