Before Using For The First Time; Preparing The Appliance; Basic Operation; Cable Length - Bosch Mums2Aw00 Gebrauchsanleitung

Before using for the first time

Before using for the
first time
Prepare the appliance for use.
Before using for the first time

Preparing the appliance

Press the release button and raise
1.
the swivel arm until it engages.
→ "Moving the swivel arm",
Page 33
Lift and remove the bowl.
2.
→ "Removing bowl", Page 33
Clean all parts that come into con-
3.
tact with food before using for the
first time.
→ "Cleaning and servicing",
Page 35
Put the cleaned and dried parts
4.
out ready for use.

Basic operation

Basic operation
You can find out everything you need
Basic operation
to know about operating your appli-
ance here.

Cable length

Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
To shorten the cable, push it into
2.
the cable storage compartment.

Moving the swivel arm

Press the release button and raise
1.
the swivel arm until it engages.
→ Fig.
3
a The swivel arm is fixed in posi-
tion 2.
Before using for the first time en
Press the release button and move
2.
the swivel arm down until it en-
gages in the vertical position.
→ Fig.
4
a The swivel arm is fixed in posi-
tion 3.

Inserting bowl

Place the bowl in the base unit.
▶
→ Fig.
5
The bowl must be positioned
straight and firm on the base unit.

Removing bowl

Lift and remove the bowl.
▶
→ Fig.
6

Inserting tools

Requirement: The drive is in the
parked position.
→ "Moving the drive to the parked
position", Page 32
Select the tool required.
1.
→ "Overview of tools", Page 32
Press the tool into the main drive
2.
until it engages.
→ Fig.
7
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
8
The protective cap
the main drive completely.

Removing tools

Pull the tool completely out of the
▶
drive.
→ Fig.
9
must cover
33