Air Filter; Spark Plug; Storage; Lubrication Of Gear - Texas A/S BCU 26 Bedienungsanleitung

Air filter

For correct performance and durability the air filter must be kept clean.
1. Remove the lid of the air filter by unscrewing the screw that fastens the lid.
2. Wash the filter in mild soap water. Leave it to dry. Pour on a little two-stroke oil Press out any surplus
oil. Replace an old and worn filter.
3. Filter and lid is fitted again. Make sure that the filter and lid is secured tightened.
Clean the air filter for every 5 hours or more often if you work in dusty areas.

Spark plug

This machine is equipped with a spark plug with an electrode distance of 0,6 mm. For optimal performance it
should be replaced once a year.

Storage

1. Empty all fuel into a can approved for petrol. Let the engine run until it stops.
2. Clean the head, and store the machine frost free and out of reach for children.
3. Observe all safety precautions concerning safe storage and handling of gasoline.

Lubrication of gear

The gear is lubricated from the factory, but for every 30-hour operation Grease MUST be refilled. Top up with
grease type: MULTIFAK EP-0 using a grease gun (not included) on the lubrication nipple. See Fig 7B
Please note that the gear gun is not supplied.
15