two trees TTS-20 PRO Bedienungsanleitung Seite 9

GRBL INTRODUCTION
1. Software Downloading
LaserGRBL is one of the most popular DIY laser engraving software, which
can be downloaded in LaserGRBL website http://lasergrbl.com/download/
(The installation package is also available on the TF card from the
manufacturer or USB flash disk).
Brief introduction:
LaserGRBL is easy to use. However, LaserGRBL only supports Windows
system (Win XP/Win 7/Win 8/XP/Win 10).
For Mac users, you can also choose LightBurn, which is also an impressive
engraving software, but it's not free. And this software also supports
Windows system.
Note: The engraving machine needs to be connected with the computer
during engraving, and the software of the engraving machine cannot be
turned off.
2. Software Installation
Double click the software installation package to start the software
installation and click "Next" until the installation is complete.
12
3. Language
Click "Language" on the menu at the top to select the language you need.
4. Load Engraving File
Click "File" and "Open File" in turn, as shown in figure 8.1, and then select the
graph you want to engrave.
LaserGRBL supports files in the formats of NC, BMP, JPG, PNG, etc.
EN
13