Barcode Scanner; Operation - Conrad 1232059 Bedienungsanleitung

1D Barcode scanner
Item no. 1232059
Intended use
The barcode scanner is designed for quick and reliable scanning of common barcodes e.g.
UPC or EAN. The scanned codes can be inserted directly into documents or forms on a
connected computer. The barcode scanner is suitable for use in shops, warehouses or offices.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content

• Barcode scanner

• USB cable
• Brief instructions
• Operating instructions
Explanations of symbols
The triangle containing a lightning symbol warns against danger of electric shock or
impairment of the electrical safety of the device.
An exclamation mark in a triangle indicates important notes in these operating
instructions that must be strictly observed.
The "hand" symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Persons / Product
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g.
in bathrooms, must be avoided under all circumstances.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the
device.
Version 10/14
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
2
3
4
5
1 LED control indicator
2 Reader unit
3 Trigger

Operation

• Before beginning using the barcode scanner, please read the instructions on scanner
settings under "Settings".
• Connect the USB cable (5) to a USB port on your computer.
To disconnect the USB cable from the barcode scanner, insert a thin object, e.g. a
bent paper clip, into the small hole above the connector while simultaneously pulling
the USB cable from the socket.
• Open a document on your computer where you wish to insert the barcode. The barcode will
be inserted at the cursor's position.
• Hold the barcode scanner's reader unit (2) at a sufficient distance and at a slight angle to the
barcode. Depending on the size and type of barcode, you may need to adjust the distance.
Please observe the following illustrations when scanning barcodes.
• Press the trigger (3) to read the barcode. When reading has been completed successfully,
an audio signal sounds and the LED indicator (1) temporarily shines green. The barcode will
be automatically read.
Tips & notes
• Make sure that the barcode you wish to scan is clean.
• The barcode you wish to scan must be fully visible.
• Observe the correct angle and distance.
• Hold the reader unit horizontal to the barcode.
• Check the settings each time you turn on the device to prevent incorrect readings.
1
4 Handle
5 USB cable with USB A plug