Silvercrest SWGS 1 A1 Kurzanleitung Seite 16

Mounting on wood: Skip step 3 .
1 . Mark the position of the drill holes
through the screw holes in the foot
2 . Drill holes with a depth of approx .
50 mm into the marked positions .
Tool:
– Masonry drill bit: Ø 8 mm
or
– Wood drill bit:
3 . Insert the dowels (not included) into
the drilled holes .
4 . Fix the foot
included) on the mounting surface .
16 GB
with screws (not
4 ] [
Ø 8 mm
.
4 ] [