Silvercrest SFK 16 B2 Montage-, Bedienungs- Und Sicherheitshinweise Seite 19

transmitter is working with a different encryption
of the signal.
The transmitter and receiver of this wireless door-
bell system are already synchronised with one
another at the factory.
Synchronise the transmitter and receiver as follows:
As soon as the receiver power plug
installed in to main socket outlet, the receiver
enters synchronizing mode for approx. 1 minute.
During the synchronizing mode, the signal
LED
4
color. You will hear two beep indicate the
synchronization mode was closed.
You can also manually enter synchronising
mode by holding the signal type selection
button
The signal LED
green and blue twice and a beep will hear, to
indicate that the receiver is in synchronizing
steadily lights up in blue and green
for approx. 3 seconds.
1
on the receiver will flash
4
is
5
GB 19