Assembly; Preparing For Use - Silvercrest SFK 16 B2 Montage-, Bedienungs- Und Sicherheitshinweise

Note: Receiver for indoor use
only.

Assembly

Note: You will need a crosshead screwdriver and
a drill with a 6 mm drill bit to assemble the product.
Note: Only use the double-sided tape 12 or
screws 15 and dowels 14 supplied for the
assembly of the product.
Mount the transmitter (see Fig. E)

Preparing for use

Note: Remove all packing materials before use.
For first time use, please remove name plate
cover on the name plate slot
9
the protective foil from the name plate cover
, remove
8
GB
,
9
17